Comparative assessment of ultra-capacitors and advanced battery energy storage systems in PowerSplit electronic-CVT vehicle powertrains
Miller, J.M. ; McCleer, P.J. ; Everett, Michael
Electric Machines and Drives, 2005 IEEE International Conference on
Page(s): 1513-1520
DOI: 10.1109/IEMDC.2005.195921

Design, analysis and fabrication of a high-performance fractional-slot concentrated winding surface PM machine
Reddy, P.B. ; Jahns, T.M. ; McCleer, P.J. ; Bohn, T.P.
Energy Conversion Congress and Exposition (ECCE), 2010 IEEE
Page(s): 1074-1081
DOI: 10.1109/ECCE.2010.5617859

Design considerations and test results for a doubly salient PM motor with flux control
Leonardi, F. ; Matsuo, T. ; Li, Y. ; Lipo, T.A. ; McCleer, P.
Industry Applications Conference, 1996. Thirty-First IAS Annual Meeting
Volume:1, Page(s): 458-463
DOI: 10.1109/IAS.1996.557066

Design optimization of an axial gap permanent magnet brushless DC motor for electric vehicle applications
Wijenayake, A.H. ; Bailey, J.M. ; McCleer, P.J.
Industry Applications Conference, 1995. Thirtieth IAS Annual Meeting
Volume: 1, Page(s): 685-692
DOI: 10.1109/IAS.1995.530366

Electric drives for pump, fan, and compressor loads in automotive applications
McCleer, P.J.
Industrial Electronics, 1995. Proceedings of the IEEE International Symposium on
Volume: 1, Page(s): 80- 85
DOI: 10.1109/ISIE.1995.496480

Experimental verification of optimal flux weakening in surface PM Machines using concentrated windings
EL-Refaie, A.M. ; Jahns, T.M. ; McCleer, P.J. ; McKeever, J.W.
Industry Applications, IEEE Transactions on
Volume:42, Issue: 2, 2006, Page(s): 443-453
DOI: 10.1109/TIA.2006.870043

Nonlinear model and momentary performance capability of a cage rotor induction machine used as an automotive combined starter-alternator
McCleer, P.J. ; Miller, J.M. ; Gale, A.R. ; Degner, M.W. ; Leonardi, F.
Industry Applications, IEEE Transactions on
Volume: 37, Issue: 3, 2001, Page(s): 840-846
DOI: 10.1109/28.924766

Rotors for synchronous reluctance traction motors: a comparative study
Leonardi, F. ; McCleer, P.J. ; Elantably, A.
Industry Applications Conference, 1999. Thirty-Fourth IAS Annual Meeting.
Volume: 2, Page(s): 835-839
DOI: 10.1109/IAS.1999.801605

Simulation Methods for Optimum Performance Estimation of Analog and Computer Impedance Relays
Mir, M. ; McCleer, P.J.
Power Apparatus and Systems, IEEE Transactions on
Volume: PAS-103, Year:1984, Issue: 6, Page(s): 1147-1154
DOI: 10.1109/TPAS.1984.318442

Starter-alternator for hybrid electric vehicle:
comparison of induction and variable reluctance machines and drives

Miller, J.M. ; Gale, A.R. ; McCleer, P.J. ; Leonardi, F. ; Lang, Jeffrey H.
Industry Applications Conference, 1998. 33rd IAS Annual Meeting.
Volume 1, Page(s): 513-523
DOI: 10.1109/IAS.1998.732360

Torque notch minimization for five phase quasi square wave back EMF PM synchronous motors with voltage source drives
McCleer, P.J. ; Lawler, J.S. ; Banerjee, B.
Industrial Electronics, 1993. Conference Proceedings, ISIE'93 - Budapest.
Page(s): 25-32
DOI: 10.1109/ISIE.1993.268820

Ultracapacitor Plus Battery Energy Storage System Sizing Methodology for HEV Power Split Electronic CVT's
Miller, J.M. ; McCleer, P.J. ; Everett, Michael ; Strangas, E.G.
Industrial Electronics, 2005. Proceedings of the IEEE International Symposium on
Volume:1, Page(s): 317- 324
DOI: 10.1109/ISIE.2005.1528930